Raceways/Trunking Tray & Accessories

Raceways/Trunking

Raceways & cable tray truckings

are commonly used in laying out underground cables and wires. We sell our Raceway in single or multi columns for installation of one or more cable connections simultaneously. Our range is commonly used in telecom, electronics, electrical and other businesses.

Default Length - 2500mm.
Finish - GI Hot dip, Pre-Galvanised as per IS-277, Powder Coated and SS-202/304/316.
Height - 30mm,40mm,50mm, 75mm and 100mm.
Width - 40mm,50mm,75mm, 100mm,150mm, 300mm,450mm,600mm,750mm and 1000mm.
Thickness - 1.2mm to 3mm.

Ask for Quotation

Floor Junction Box

Floor Junction Boxes are used to connect various raceways or ducts, transporting electric wires and floor data cables. This enables the wires and cables to be attached to desired devices. Usually they are a closed cell with raceways side openings and access from the top.
Default Length - 2500mm.
Finish - GI Hot dip, Pre-Galvanised as per IS-277, Powder Coated and SS-202/304/316.
Height - 30mm,40mm,50mm, 75mm and 100mm.
Width - 40mm,50mm,75mm, 100mm,150mm, 300mm,450mm,600mm,750mm and 1000mm.
Thickness - 1.2mm to 3mm.

Ask for Quotation

floor_junction_box_mnaufacturer_in_maharashtra_india

Unistrut

Unistrut cable tray systems

are typically used for the support of power delivery and communication cables. Cable Tray systems make running new lines simple. By putting them on an open, flat surface the new cables are placed.

Ask for Quotation

Z Channel

A wide range of Z angle trays are available, which are made of fine quality metal and alloy. These materials are resistant to corrosion and have elevated tensile strength. These angles have flawless productivity as they are produced in compliance with the latest standards.
Default Length - 2500mm.
Finish - GI Hot dip, Pre-Galvanised as per IS-277, Powder Coated and SS-202/304/316.
Height - 30mm,40mm,50mm, 75mm and 100mm.
Width - 40mm,50mm,75mm, 100mm,150mm, 300mm,450mm,600mm,750mm and 1000mm.
Thickness - 1.2mm to 3mm.

Ask for Quotation

z_channel_steel_suppliers_in_mumbai_india

‘C’ Channel

'C' Channel is used to provide a route and to protect the cable, and its reliability and long service life are highly valued. Our team of experts produce them using high quality raw material that is sourced from known and checked vendors. These channels are available in different specifications to the clients.

Default Length - 2500mm.
Finish - GI Hot dip, Pre-Galvanised as per IS-277, Powder Coated and SS-202/304/316. Height - 30mm,40mm,50mm, 75mm and 100mm.
Width - 40mm,50mm,75mm, 100mm,150mm, 300mm,450mm,600mm,750mm and 1000mm.
Thickness - 1.2mm to 3mm.

Ask for Quotation

Reducer

We are a

leading Cable Tray Reducer supplier

. These are recognised for their accuracy and durability. They are used in an effortless and appropriate way to connect larger cable trays with the smaller ones. These trays are also available to accommodate the requirements of the client in perforations of various sizes.

Standard Length - 2500mm.
Thickness - 1.2mm to 3mm.
Height - 30mm,40mm,50mm, 75mm and 100mm.
Width - 40mm,50mm,75mm, 100mm,150mm, 300mm,450mm,600mm,750mm and 1000mm.
Finish - GI Hot dip, Pre-Galvanised as per IS-277, Powder Coated and SS-202/304/316.

Ask for Quotation

FAQ:

A: Raceways generally mount on a wall in a room where power and communications cables are terminated. raceways are protection wires and cables from heat, humidity, corrosion, water intrusion and general physical threats.

A: Types of Cable Tray

Raceways/ Trucking

Junction Box

Unistrut

Z Channel

C’ Channel

Reducer

A: Cable tray is classified by the NEC (NFPA 70 the National Electrical Code) as a support system and not as a raceway. Generally speaking raceway completely encloses the cable inside of it.