Perforated Cable Trays & Accessories In Bangladesh
Tee
We are dedicated to contribute continuously for a broad scope of high quality Perforated Tee in
Bangladesh. This Perforated Tee is known for its solidness. The offered Perforated Tee is broadly
used to play out a maintenance of a hole of the cervical, thoracic, and so on Further, the offered
items are accessible in the market in mass.
Standard Length - 2500mm
Thickness - 1.2mm to 3mm
Height - 25mm,40mm, 75mm and 100mm.
Width - 40mm, 50mm, 75mm, 100mm, 150mm, 300mm, 600mm, 750mm and 1000mm.
Finish - Pre-Galvanised as per IS-277, Powder Coated, Painted and Hot Dip Galvanised as per
IS- 2629 and SS 202/304/316.
Right/Left Reducer
We are manufacturer and supplier of Cable Tray Reducer in Bangladesh.Our items are quality minded
very much characterized boundaries, to convey deformity unfenced at customers end . Reducers are
mainly used with Perforated Type Of Cable Trays To route the Cable which is suitable for joining
Cable Trays of different widths In the same plane.
Our Product Design makes sure that the cable to channel properly and slanting of bend to make sure
that the cable is not damaged.
Standard Length - 2500mm
Thickness - 1.2mm to 3mm
Height - 25mm,40mm, 75mm and 100mm.
Width - 40mm, 50mm, 75mm, 100mm, 150mm, 300mm, 600mm, 750mm and 1000mm.
Finish - Pre-Galvanised as per IS-277, Powder Coated, Painted and Hot Dip Galvanised as per
IS- 2629 and SS 202/304/316.
Vertical Outward Bend
We are one of the best Manufacturer ,Supplier and Exporters of Perforated Cable Trays in
Bangladesh.Perforated Vertical Outward Bends are basically used in mix with Perforated Cable Trays
To station the cable where bearing the changes to an alternate plane.
Standard Length - 2500mm
Thickness - 1.2mm to 3mm
Height - 25mm,40mm, 75mm and 100mm.
Width - 40mm, 50mm, 75mm, 100mm, 150mm, 300mm, 600mm, 750mm and 1000mm.
Finish - Pre-Galvanised as per IS-277, Powder Coated, Painted and Hot Dip Galvanised as per
IS- 2629 and SS 202/304/316.
Perforated Cable Tray
We are one of the best manufacturer of Cable Trays In Bangladesh. We also manufacture and supply
Perforated Cable Trays in Bangladesh. Perforated Cable Trays are ideal to introduce enormous volumes
of Heavy Duty power cables. Perforation makes full free air rating of cable ,Higher current stream
can be accomplished at a similar get segment.
Standard Length - 2500mm
Thickness - 1.2mm to 3mm
Height - 25mm,40mm, 75mm and 100mm.
Width - 40mm, 50mm, 75mm, 100mm, 150mm, 300mm, 600mm, 750mm and 1000mm.
Finish - Pre-Galvanised as per IS-277, Powder Coated, Painted and Hot Dip Galvanised as per
IS- 2629 and SS 202/304/316.
Vertical Inward Bend
We are the best manufacturer of Perforated Cable Trays in Bangladesh . We manufacture and export
various types of perforated cable trays in Bangladesh such as Vertically Inward Bend , Tee and many
more. In cable tray accessories , Vertical inside bend is utilized to bend the cable tray running.
These Bends can be made in any degree according to requirement. Vertical inside bend is being
utilized to move cable tray from ground level.
Standard Length - 2500mm
Thickness - 1.2mm to 3mm
Height - 25mm,40mm, 75mm and 100mm.
Width - 40mm, 50mm, 75mm, 100mm, 150mm, 300mm, 600mm, 750mm and 1000mm.
Finish - Pre-Galvanised as per IS-277, Powder Coated, Painted and Hot Dip Galvanised as per
IS- 2629 and SS 202/304/316.
Horizontal Bend
We are one of the best manufacturer of Cable Tray In Bangladesh. We also manufacture and supply
Horizontal Bends in Perforated Cable Trays in Bangladesh. Horizontal Bends are mainly used to mix
with perforated cable trays to course the cables in 90 degree where two dividers are conjoining.
Standard Length - 2500mm
Thickness - 1.2mm to 3mm
Height - 25mm,40mm, 75mm and 100mm.
Width - 40mm, 50mm, 75mm, 100mm, 150mm, 300mm, 600mm, 750mm and 1000mm.
Finish - Pre-Galvanised as per IS-277, Powder Coated, Painted and Hot Dip Galvanised as per
IS- 2629 and SS 202/304/316.
FAQ:
